Categories

A new and efficient Solid Phase Microextraction approach for analysis of high fat content food samples using a matrix-compatible coating

You are here:
  • Main
  • Foods
  • Semivolatiles in Foods
  • A new and efficient Solid Phase Microextraction approach for analysis of high fat content food samples using a matrix-compatible coating
< All Topics

Authors: Selenia De Grazia, Emanuela Gionfriddo, Janusz Pawliszyn

Abstract

The current work presents the optimization of a protocol enabling direct extraction of avocado samples by a new Solid Phase Microextraction matrix compatible coating. In order to further extend the coating life time, pre-desorption and post-desorption washing steps were optimized for solvent type, time, and degree of agitation employed. Using optimized conditions, lifetime profiles of the coating related to extraction of a group of analytes bearing different physical-chemical properties were obtained. Over 80 successive extractions were carried out to establish coating efficiency using PDMS/DVB 65 µm commercial coating in comparison with the PDMS/DVB/PDMS. The PDMS/DVB coating was more prone to irreversible matrix attachment on its surface, with consequent reduction of its extractive performance after 80 consecutive extractions. Conversely, the PDMS/DVB/PDMS coating showed enhanced inertness towards matrix fouling due to its outer smooth PDMS layer. This work represents the first step towards the development of robust SPME methods for quantification of contaminants in avocado as well as other fatty-based matrices, with minimal sample pre-treatment prior to extraction. In addition, an evaluation of matrix components attachment on the coating surface and related artifacts created by desorption of the coating at high temperatures in the GC-injector port, has been performed by GCxGC-ToF/MS.

Read full study: https://www.sciencedirect.com/science/article/abs/pii/S0039914017301741?via%3Dihub

Next Article A novel analytical approach in the assessment of unprocessed Kaffir lime peel and pulp as potential raw materials for cosmetic applications