Head Clamp
Assembly
The Head Clamp Assembly:
- Carries the hot jet
- Mechanically accepts the Column Holder
- Centers the modulator tube (loop “apex”) in the gas jets.
This module is extremely reliable, but field-replaceable just in case.
Head Clamp
Assembly
The Head Clamp Assembly:
- Carries the hot jet
- Mechanically accepts the Column Holder
- Centers the modulator tube (loop “apex”) in the gas jets.
This module is extremely reliable, but field-replaceable just in case.
- Estimated MTBF > 7 years
- Field Replaceable Module
- Set-and-Forget Installation
- Can modulate two loops in one Column Holder
("buy one thermal modulator, get one free") - Modulates two parallel Column Sets
- Hot Jet Gas Fitting: 1/4" Swagelok
Agilent GCs:
| Max Heater Power (Watts) | 80 |
| Max Voltage DC | 40 |
| Sensor Type | Platinum Resistor |
| Sensor Resistance (Ohms) | ~ 101 |
| Max Heater Temperature (C) | 375 |
| Temperature controlled by AUX 2 Thermal Zone | |
| Gas Consumption (L/min) | 10 to 15 |
| Typical Gas | Dry N2 |
| Main N2 Supply Pressure (psi) | 100 |
| Valve N2 Supply Pressure (psi) | 40 |
Shimadzu GCs:
| Max Heater Power (Watts) | 150 |
| Max Voltage AC | 120 |
| Heater Resistance (Ohms) | 96 |
| Sensor Type | Platinum Resistor |
| Max Temperature (C) | 375 |
| Gas Consumption (L/min) | 10 to 15 |
| Typical Gas | Dry N2 |
| Main N2 Supply Pressure (psi) | 100 |
| Valve N2 Supply Pressure (psi) | 40 |